[Jan-2022] Pass Veritas VCS-279 Tests Engine pdf - All Free Dumps
Administration of Veritas NetBackup 8.1.2 and NetBackup Appliances 3.1 Practice Tests 2022 | Pass VCS-279 with confidence!
NEW QUESTION 41
An administrator configures a policy to perform file system backups of multiple client systems using the "Allow multiple data streams" feature. All other policy attributes are at default settings.
Which master server host property must be configured to enable the backup job from all clients to run concurrently?
- A. Client Attributes > Maximum data streams
- B. Global Attributes > Maximum jobs per client
- C. Policy storage unit > Enable multiplexing
- D. Policy storage unit > Maximum concurrent jobs
Answer: B
NEW QUESTION 42
A NetBackup environment with a single tape storage unit is experiencing performance issues when running full backups of a Windows file server with over a million small files. Backups for all other clients on the same network are performing adequately.
What should the administrator modify to improve performance for the client?
- A. enable Windows Change Journal
- B. modify data buffer settings for the data path
- C. enable the Use Accelerator policy attribute
- D. use Flashbackup-Windows policy type
Answer: A
NEW QUESTION 43
An administrator navigates to NetBackup Management > Catalog, and selects Action: Import. After clicking the Search Now button, the following message appears:
INF - Found no images matching the selection criteria that were ready for phase 2 import.
Which step must the administrator perform in order to get search results?
- A. increase the "Catalog cleanup wait time" in the Clean-up host property
- B. run the Initiate Import command in the Catalog > Action menu
- C. run the "Recover the catalogs" wizard
- D. enable Catalog > Override default priority, and increase the Job Priority value
Answer: B
NEW QUESTION 44
Which utility is least helpful when troubleshooting network connectivity issues that exist between a media server and a client?
- A. nbdb_ping
- B. bptestnetconn
- C. bptestbpcd
- D. bpclntcmd
Answer: D
NEW QUESTION 45
What is the definition of a Storage Unit?
- A. It is a label that NetBackup associates with physical storage.
- B. It is a label that lets the administrator create a storage plan.
- C. It is a label that defines where storage is physically located.
- D. It is a label that the Media Manager associates with physical storage.
Answer: A
NEW QUESTION 46
After creating a NBU-Catalog type backup policy, an administrator receives the following message:
DR file is on the same partition as your catalog and will be unusable in an actual disaster or disk failure.
Which two options are available to the administrator to ensure the DR file is available for future use? (Choose two.)
- A. ensure the folder DR file is on a non-root volume
- B. configure a valid email address of the administrator in the "Send email" option
- C. ensure the DR file is created on a volume other than the NetBackup volume
- D. ensure the NetBackup catalog is on a non-root volume
- E. configure Auto Image Replication to send the DR file to a remote master server
Answer: B,C
NEW QUESTION 47
NetBackup has frozen some of the tapes added to the robot.
Which log must be enabled to determine why the tapes were frozen?
- A. robots
- B. vmd
- C. ltid
- D. bptm
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 48
Upon arriving at work on a Monday, an administrator sees several replication jobs that have failed with the following error message:
no images were successfully processed
Which two reasons may be the cause for the error code? (Choose two.)
- A. There are network connectivity issues between the source and target domains.
- B. The NetBackup host ID-based certificate was revoked.
- C. The checkpoint restart is disabled for the replication jobs.
- D. There is insufficient storage space on the target storage server.
- E. There are insufficient tapes in the replication volume pool.
Answer: A,D
NEW QUESTION 49
Where can an administrator configure cloud storage throttling?
- A. NetBackup Management > Host Properties > Clients > Scalable Storage
- B. NetBackup Management > Host Properties > Master Servers > Scalable Storage
- C. NetBackup Management > Storage > Storage Unit > Properties of the cloud storage unit
- D. NetBackup Management > Host Properties > Media Servers > Scalable Storage
Answer: D
NEW QUESTION 50
Which command should an administrator use to generate a list of all files backed up on a client for a specific backup job?
- A. bpimagelist
- B. bpdbjobs
- C. bpimage
- D. bplist
Answer: D
NEW QUESTION 51
Which storage unit group selection causes NetBackup to choose the least recently selected storage unit in the list as each new job is started?
- A. Round Robin
- B. Failover
- C. Media Server Load Balancing
- D. Prioritized
Answer: A
NEW QUESTION 52
An administrator has a MS-Windows type policy that has failed for a Microsoft Windows NetBackup client.
The policy uses the ALL_LOCAL_DRIVES backup selection. See the extract from the end of the job details below:
Which two logs will provide the most relevant information for troubleshooting and resolving the error?
(Choose two.)
- A. Operating system logs on the media server
- B. NetBackup bpfis logs on the client
- C. Operating system logs on the client
- D. NetBackup bpfis logs on the media server
- E. NetBackup bptm logs on the media server
Answer: B,C
NEW QUESTION 53
Which command should an administrator run to display all images written to both disk and tape for a particular client?
- A. bpimmedia
- B. bplist
- C. bpclntcmd
- D. bpmedia
Answer: A
NEW QUESTION 54
An administrator wants to look at configuration information: status, drivers loaded, port and device information and connections to remote appliances for all Fibre Channel HBAs installed on an appliance.
Which NetBackup Appliance Shell Menu (CUSH) command should the administrator use to display the information?
- A. Manage > FibreChannel > Show
- B. Monitor > Hardware ShowHealth Fibrechannel
- C. Manage > FibreChannel > Scan
- D. Manage > FiberChannel > Statistics
Answer: A
NEW QUESTION 55
What is the certificate deployment and management behavior when the security level is set to High?
- A. Certificates are deployed automatically for known hosts and the Certificate Revocation List (CRL) is refreshed every hour.
- B. Certificates are deployed automatically for known hosts and the Certificate Revocation List (CRL) is refreshed every 4 hours.
- C. Certificates are deployed with a token for all hosts and the Certificate Revocation List (CRL) is refreshed every 4 hours.
- D. Certificates are deployed automatically for all hosts and the Certificate Revocation List (CRL) is refreshed every hour.
Answer: B
NEW QUESTION 56
An administrator is configuring a new device and receives the following error message:
Unable to determine robot type
What are two possible solutions? (Select two.)
- A. select the correct device type for the drives
- B. download a new device_mapping file from the Veritas Support website
- C. ensure the tape drive is closed and ready for use
- D. verify compatibility for the library with NetBackup
- E. perform a rescan of the available tape drives
Answer: A,E
NEW QUESTION 57
Which port is used by Smart Meter?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Explanation
https://www.veritas.com/content/support/en_US/doc/133778034-133778052-1
NEW QUESTION 58
An administrator is experiencing a backup failure, which may be due to lack of connection between the media and master server. The status of the media server is shown below:
Media server showing offline
Which command can the administrator run to change the status of the media server?
- A. bpminlicense
- B. nbemmcmd
- C. nbdb_admin
- D. bptestbpcd
Answer: B
NEW QUESTION 59
A backup job is showing the following error message:
Which two actions can an administrator perform to ensure the backup completes successfully? (Choose two.)
- A. increase the "Limit I/O streams" parameter on the disk volume
- B. assign a specific Storage Unit for that policy
- C. ensure at least one storage unit is without the On Demand Only option selected
- D. increase the Multiplexing value on the Storage Unit
- E. increase the "Maximum concurrent jobs" parameter on the Storage Unit
Answer: B,C
NEW QUESTION 60
Which action is performed by the NetBackup deduplication plug-in?
- A. processing MSDP transaction logs
- B. performing file fingerprinting actions
- C. performing queue processing
- D. writing data segments into the MSDP containers
Answer: D
NEW QUESTION 61
A NetBackup master server has commenced writing four long-running duplication jobs to an AdvancedDisk disk pool. The value of "Maximum concurrent jobs" for the storage unit and "Limit I/O streams" for the disk pool are both set to 4.
There are 35 jobs queued on the master server that require this disk pool:
5 replication jobs with priority 9999
10 backup jobs with priority 999
20 duplication jobs with priority 99
Two restore jobs that require this disk pool are then submitted with default priority.
Which job type goes active next?
- A. Replication
- B. Duplication
- C. Restore
- D. Backup
Answer: C
NEW QUESTION 62
Which type of punctuation is used to separate multiple interface name entries in the Network > Show Properties [InterfaceNames] command in the NetBackup Appliance Shell Menu (CLISH)?
- A. semicolon
- B. comma
- C. hyphen
- D. colon
Answer: B
NEW QUESTION 63
An administrator tries to suspend an active job from the NetBackup Activity Monitor, but discovers that the option is grayed out.
What is preventing the administrator from suspending the job?
- A. The parent job is still active.
- B. Multiplexing is enabled.
- C. Child jobs are still active.
- D. Checkpoint restart is disabled.
Answer: C
NEW QUESTION 64
......
Veritas VCS-279 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Tune NetBackup 8.1.2 and NetBackup Appliances 3.1.2 | -Analyze, optimize, and tune NetBackup. -Analyze, optimize, and tune NetBackup Appliances using Appliance Shell Menu (CLISH) and Appliance Web Console. |
| Troubleshoot NetBackup 8.1.2 and NetBackup Appliances 3.1.2 | - Interpret status codes and job details in order to diagnose and troubleshoot failed jobs. -Troubleshoot devices and media, including connectivity between master, media, and client. -Troubleshoot common issues related to NetBackup disaster recovery including recovering the NetBackup catalog. -Troubleshoot basic NetBackup Appliance issues. |
| Monitor and Maintain NetBackup 8.1.2 and NetBackup Appliances 3.1.2 | -Describe how to manage tape devices and tape media. -Describe image management concepts and how to use the NetBackup administration console to verify, expire, import, and manually duplicate backup images. -Describe how to manage NetBackup disk and cloud storage. -Interpret available reports to verify and monitor NetBackup. -Describe how and when to prioritize, cancel, suspend, resume, restart, retry or manually run backup and duplication jobs. -Describe how to initiate, prioritize, and monitor NetBackup restore jobs. -Describe how to manage NetBackup Security (e.g., RBAC, host certificates). -Describe how to install client updates (e.g., VxUpdate). -Describe how to interact with NetBackup on appliances. -Describe how to manage NetBackup Appliances using Appliance Shell Menu (CLISH) and Appliance Web Console. -Describe how to obtain and install NetBackup Appliance updates and EEBs using Appliance Shell Menu (CLISH), Appliance Management Server (AMS), and Appliance Web Console. -Monitor NetBackup Appliances |
| Configure NetBackup 8.1.2 and NetBackup Appliances 3.1.2 | -Describe how to configure various master/media/client settings and host properties using the NetBackup administration console. -Describe how to configure removable media (tape), volume pools, volume groups, and media manager storage units. -Describe how to configure disk and cloud storage, storage units, and storage unit groups. -Describe how to configure and utilize backup policies. -Explain how to implement specialized backup solutions including synthetic backups, True Image Restore (TIR), multiple data streams, checkpoint restart, and the use of backup duplication solutions such as disk staging, Storage Lifecycle Policies, Auto Image Replication, and NetBackup Accelerator. -Describe the function, uses, configuration, and administration of the NetBackup deduplication options, such as media server deduplication, client-side deduplication, optimized duplication, and storage servers. -Describe how to perform catalog backup configuration tasks. -Describe how to configure appliances through Appliance Shell Menu (CLISH) and Appliance Web Console. |
Online Exam Practice Tests with detailed explanations!: https://prep4sure.vce4dumps.com/VCS-279-latest-dumps.html